Control deslizante de aire

Breath layer is in the middle of chamber, upper part is the material chamber, lower part is the air chamber. When the gas with a certain pressure is blown into the air chamber, the material is fluidized through the permeable layer, so the material flows inside the chamber like a fluid under the action of gravity. Fan is used as the pressure wind source. The excess air inside the material chamber is drawn away by the dust collector through the exhaust port of the air slider chute.

Technical parameters

Handling material：dry powder material moisture content≤1%，temperature≤150℃.

 

Model\  Chamber  width				XZ200	XZ250	XZ315	XZ400	XZ500	XZ630	XZ800
Conveying Capacity	Slope	Material	mm	200	250	315	400	500	630	800
	4°	Cemento	t/h	22	40	70	130	220	320	400
		Raw material		16	30	55	100	165	245	310
	6°	Cemento		40	65	120	250	400	610	765
		Raw material		30	55	90	185	300	455	565
	8°	Cemento		50	80	140	300	470	720	900
		Raw material		35	65	110	225	355	540	670
	10°	Cemento		60	100	170	380	570	900	1080
		Raw material		45	80	140	285	425	670	800
	12°	Cemento		70	120	205	455	685	1080	1295
		Raw material		50	95	165	340	510	805	960